FAQ’s

What is the SmileLABS™ whitening process?

Our method uses our proprietary photosensitive hydrogen peroxide gel, our signature paint-on technique, and our SmileLABS™ Infinity Series Accelerator Lights, which allow us to complete a whitening in as little as 15-30 minutes with an average shade change of 2-10 shades as measured on a standard dental shade guide. In the chairside treatment, the client is first given a teeth-cleaning swab that they use to remove any plaque from the surface of their teeth. The beginning shade is measured and agreed upon with the use of a mirror and dental shade guide. Then, the client inserts a mouth prop and cheek retractor in their mouth.

 

Using the gel syringe, a tiny BB-sized droplet of gel is placed by the client on each of their teeth that are to be whitened. The treatment specialist distributes the the whitening gel on each tooth with a a fine tipped micro brush. The client then relaxes fully against the head rest of the chair and the light is positioned correctly and activated. The client relaxes in the chair with the light on for 15 minutes, at which time the light automatically goes off, the client then rinse their mouth with water.

 

Double Session – If a second 15-minute session is to be done, the client reapplies fresh gel to their teeth and the process is repeated. After final mouth rinsing, the ending shade is agreed upon and the whitening treatment is complete. Lastly, the client is given post treatment instructions both verbally and written, and the client takes home written post-treatment instructions and recommendations.

Do a lot of people get their teeth whitened?

Cosmetic Teeth Whitening is the #1 requested treatment procedure in a dental office, and is second only to hair treatments in the beauty world. More people than you might imagine have their teeth whitened. A nice bright, white smile can make a big difference in the way a person feels about themselves, and can help boost confidence in almost any social setting.

How long does the SmileLABS™ process take from start to finish?

The chairside teeth whitening treatment process, takes a minimum of about a half hour from start to finish to do a single treatment, and about 50 minutes total time to do a double teeth whitening session.  That includes initial paperwork, pre-treatment prep, and post-treatment finishing and instruction. So, in less than an hour maximum, one can have a whiter smile.

 

With the take home products, daily teeth whitening treatments are either a half-hour or one hour, depending on which kit is purchased. Then, the time to complete the teeth whitening regimen is from 5-10 days total, depending on the starting shade of the teeth and on the ending level of whiteness that the client desires.

What will I experience during this procedure?

You may feel a slight tingling, bubbling or effervescence against your teeth for the first few minutes. This is normal and is the sign that the gel is producing the oxygen that does the work of the whitening.

Does the SmileLABS™ process cause damage to teeth enamel?

No, research has shown that whitening your teeth with peroxide-based gels does not harm the enamel of the teeth. This type of whitening has been done for over twenty years, even with stronger whitening gels than what SmileLABS™ uses, and no damage to enamel has occurred.[i] [ii]

Does SmileLABS™ whitening process or gels do any damage to the nerves in teeth?

No, the scientific literature shows that neither the gel nor the light that SmileLABS™ uses will cause any nerve damage.[iii] [iv] [v]

 

Does the whitening gels that SmileLABS™ use cause harm to any dental restoration, such as fillings, bonding, crowns, bridges, partials, dentures, veneers, or implants?

 

Again, professional dental research has shown that this process will not harm currently used dental restorative materials.[vi]

How long will my teeth stay white?

It depends greatly on the client’s lifestyle and habits. If one drinks a lot of coffee, tea, dark soda, or red wine, or especially if one smokes, the results will last 3-4 months. These individuals may have to repeat the process more often, which is why we recommend the Package of 5 Sessions + 3 Remineralization Treatments. If one does not drink coffee, tea, dark soda, or red wine, or especially if one does not smoke, the results will last 6-12 months.

Is the SmileLABS™ procedure safe?

Yes. Extensive clinical research and trials have shown that Cosmetic Teeth Whitening is safe.[vii] Many dentists and dental researchers consider this process to be the safest dental or cosmetic procedure available. SmileLABS™ does recommend that no one under the age of 18 years, nor any women that are pregnant or breast feeding, have this procedure done.

Who may benefit from the SmileLABS™ process?

Almost everyone can benefit from having his or her teeth whitened. Treatment results can vary and your trained SmileLABS™ treatment specialist can help clients determine if they are viable candidates for our processes. One should remember that one’s teeth cannot be whiter than their genetically determined base shade. Certain types of staining from antibiotics or excess fluoride may not whiten as much as those without these discolorations.

Who shouldn’t do this process?

SmileLABS™ recommends seeing a dentist first before whitening to those clients that haven’t seen a dentist in 2 or more years, have open unfilled holes in their teeth, or who have untreated gum disease. Also, as with most elective procedures, we do not recommend Cosmetic Teeth Whitening for any woman that is pregnant or nursing. We always recommend consulting your doctor.

Which starting teeth shades respond best to teeth whitening?

In general, if your teeth are stained yellow it will be easier to whiten them. Gray teeth are harder to whiten and don’t respond as well as yellow-stained teeth. If one’s genetically determined base teeth color is yellow (that is, not stained yellow), then those teeth will be considerably harder to white.

Can anyone whiten their teeth so they become “snow-white?”

No. Some people are born with close to snow-white colored teeth, but most have varying shades of yellow, gray, or a combination of both. Cosmetic Teeth Whitening does produce some astounding results, and many will say, “Wow!” after their whitening procedure is completed. The vast majority of SmileLABS™ clients are extremely pleased with their results.

I haven’t seen a dentist in 2 (or more) years. Is it OK for me to proceed today with SmileLABS™ teeth whitening?

We highly recommend seeing a dentist first before beginning a whitening treatment of any kind. After that amount of time of not seeing a dentist, many unfavorable conditions could exist in a person’s mouth, and that person might not even be aware of those problems. When in doubt, always see a dentist first.

I have crowns (caps) or veneers (bonding) on my front teeth. What will this process do to them?

Teeth whitening will not change any of these restoration’s intrinsic (inside) color, however, it may slightly remove some extrinsic (outside) stains. The procedure will not harm dental restorations. If one’s natural teeth are yellower than the restored teeth, then whitening may bring the natural teeth closer in shade to the restored teeth. If the restored teeth are yellower in color, then whitening will only make the difference in shade greater between them and their naturally colored counterparts. In this case, one may want to whiten their teeth first, then have the restorations redone by their dentist to match the newly whitened color. This, however, can lead to expensive and extensive dental work, so again, consult a dentist first.

I have a temporary crown (or temporary cap, bridge, or veneer) on my teeth. Can I do this process?

No, we recommend that the permanent restorations be placed by the person’s dentist before commencing a whitening program.

I have oral piercings or I have braces on my teeth (or a fixed wire retainer). Can I use this teeth whitening process?

If you are in active orthodontic treatment and have bands and/or brackets bonded or cemented to your teeth, please wait until after completion of treatment and all appliances have been removed before commencing any whitening treatment. A lower tightly bonded lingual (tongue-side) wire retainer that was placed by an orthodontist after regular orthodontic treatment is fine to have in your mouth while whitening is done.

 

All oral piercings (tongue, cheeks, lips, or nose) must be removed prior to having any teeth whiting treatments done. If they are not easily removable, we recommend that our Authorized SmileLABS™ Dealers not sell any whitening products or services to these individuals until the appliances are removed.

Can I do this process if I have open holes (cavities) in my mouth that haven’t yet been filled by my dentist?

Again, the answer to this question is that these individuals need to be seen by their dentist first and have the condition permanently resolved prior to any form of teeth whitening or teeth whitening.

My dentist told me I have gum disease that he hasn’t treated yet. Can I do this?

The condition needs to be treated and under control by a dentist before any teeth whitening is considered; once under control and with the approval of one’s dentist, teeth whitening could then be done.

Is the process I get from you today being performed by a dentist?

No, the Authorized SmileLABS treatment specialist is not a dentist or dental professional. He or she has been trained in the SmileLABS™ system and can assist you in the self-administration of our products and services, but will not render dental opinions, give dental advice, or otherwise pose as a dentist or practice dentistry.

Is this the same type of teeth whitening gel that is used by my family dentist?

Yes, we use the same type of peroxide-based teeth whitening gels as a dentist, but SmileLABS™ gels may be of a lower strength than what a dentist might use, which is why our whitening results in little to no sensitivity. We do get the same or better results as a dentist in less time, however, depending on the type of treatment the dentist chooses to use.

Do dentists use SmileLABS™ products or procedures?

Yes, we supply many dentists with our gels, lights, and systems. They do, however, tend to charge more for their use of these products than do our Authorized SmileLab Dealers.

What causes teeth to discolor or become yellower?

The causes are many. The most common are natural aging and the prolonged consumption of staining agents such as tobacco, coffee, tea, red wine, dark-colored soda, and staining foods like mustard, tomato sauce, or blueberries. A good rule to go by is that if it will stain a white handkerchief or white t-shirt, then it may similarly stain your teeth. Other people may have a different type of staining that occurs when the permanent adult teeth are forming, typically at age prenatal through 12. When children of this age group are exposed to excessive fluoride, tetracycline or other antibiotics, certain embedded and permanent stains or discolored tooth formations may occur. These types of “tooth-formation” stains do not respond well to any form of teeth whitening. These individuals should consult their dentist for other options, such as bonding, veneers, or crowns.

Are there any side effects to having the SmileLABS™ teeth whitening process done?

Some people may feel a slight tingling sensation or have minor discomfort during or after a teeth-whitening session. A few may have white spots, called blanching, on their gums as well. These effects are transient and quickly dissipate with a few minutes or so. Most people report no discomfort or sensitivity at all during or after their SmileLABS™ treatment. Different people react in different ways to chemicals and treatments, and this holds true for Cosmetic Teeth Whitening procedures as well as teeth whitening products. SmileLABS™ recommends that if a client is experiencing pain or discomfort during the whitening process, they should discontinue the treatment immediately and consult their dentist as soon as possible as this may indicate an undiscovered or unknown problem that might be occurring in their mouths.

How long before I can eat or drink anything after completing this process?

We recommend that one should avoid eating or drinking any stain-causing foods or beverages (coffee, tea, cola, red wine, dark fruit juices) for at least 48 hours. Anything that could stain a white t-shirt, can stain your teeth. However, with the remineralization treatment, one can eat or drink anything with color after just 30 minutes.

How does the SmileLABS™ light differ from the smaller hand-held ones I’ve seen that come with some of the take home kits sold at Wal-Mart, Walgreens, or CVS stores?

For the most part, the light’s wavelength may be approximately the same as ours, but the intensity of these small hand-held lights is much lower and therefore will not work as well or as fast. These lights also come with kits using carbamide peroxide, which does not react as well or as fast as hydrogen peroxide gels do with the addition of a light. The light in this case is more of a gimmick than an actual aid to teeth whitening, and can help cause the price of these take home kits to be higher than need be.

I have dental insurance. Is the chairside light-assisted SmileLABS™ Cosmetic Teeth Whitening procedure covered by dental insurance?

No. We are not aware of any dental insurance that has a covered benefit for Cosmetic Teeth Whitening.

What if I get sensitivity after using SmileLABS™ Teeth Whitening process or products?

It is our experience that even though it is unlikely that you will have any discomfort from SmileLABS™ teeth whitening, if it does occur, we would recommend the use of a Sensodyne™-type toothpaste be used after whitening. You could also use over-the-counter analgesics such as acetaminophen or ibuprofen, if you can take those products safely.

What kind of results can I expect from your process?

Everyone’s teeth are different. We all have different body chemistry, dental health, genetics, etc. Most people will experience a 2-4 shades whiter difference with a 15-minute treatment, and 4-10 shades difference with a double (two back-to-back 15-minute regimens) treatment session. The new multi-session regimen, which is five 15-minute treatments any way the client wants, doing no more than a double in any 24-hour period, over the next six months, may result in more than 15 shades whiter from start to finish. The “WOW!” factor is huge.

What makes SmileLABS™ Teeth Whitening procedures and products superior to all other types of teeth whitening that is available today?

We use only the finest Made-in-the-USA whitening gels manufactured to our proprietary formula. We use a high intensity, cool, blue visible spectrum light that puts off no heat to cause tooth nerve inflammation. Our new SmileLABS™ Brush-On technique utilizes our water based peroxide gel prevents desiccation and keeps the teeth hydrated during whitening. This hydration also prevents tooth nerve inflammation, which can lead to strong teeth sensitivity. Ours is the only system on the market that combines these three factors to give our clients the best, fastest, and whitest results with virtually no unpleasant side effects.

Is SmileLABS™ better than over-the-counter strips or whitening toothpastes?

If one considers speed of action as a primary desirable feature of a teeth whitening system, then the results obtained with our system are much better than strips or so-called whitening toothpastes. The toothpastes available today have a very minor whitening potential as compared to our system. They only slightly lessen extrinsic, not intrinsic, stains. Strips will whiten teeth, but they take at least a month or more to complete treatment and have a known high occurrence of gum/teeth sensitivity.

What do the different percentages of teeth whitening gels mean?

For example, a 36% carbamide peroxide gel eventually breaks down into a 10-12% hydrogen peroxide in the mouth. It is the eventual hydrogen peroxide concentration that matters because only in this form can it release the oxygen necessary to perform the actual chemical process of whitening teeth.

The part of my teeth near the gums isn’t as white as the rest of the teeth even after whitening. Why is this?

The teeth usually have a seamless whitening transition zone from whiter near the biting surface of the tooth to less white near the gum line. This is normal and is an expected result because the tooth enamel is thinner near the gum line and will show through some of the tooth’s naturally yellower inner dentin layer. It is this slight transition that makes the tooth appear to be more natural and not just a monochrome “Chiclet” of a tooth, which looks very unnatural.

I have small white spots on some of my front teeth. How will whitening affect these spots?

It is normal that certain areas of a tooth that are decalcified will respond and whiten more rapidly than the surrounding tooth structure. The rest of the tooth eventually catches up with the spots and will become more uniform in color as one continues to whiten.

Will SmileLABS™ Teeth Whitening treatment fix my tetracycline stained teeth?

Tetracycline stained teeth are caused by the uptake of this antibiotic into the enamel while the tooth is newly forming at the ages of prenatal to 12 years. The staining looks like there are grey to tan “banding” layers in the tooth. This type of intrinsic (inside the tooth) striated (horizontally striped) staining is very difficult to correct with Cosmetic Teeth Whitening. We recommend that the customer see his or her dentist to have this staining treated by more extensive, aggressive teeth whitening or by covering the staining with the placement of veneers or crowns.

I have splotchy teeth with mottled tan, brown, and white spots on them, especially the front ones. Will SmileLABS™ processes repair this?

No, this type of staining is known as fluorosis. It was caused by the uptake into the enamel of excessive amounts of fluoride while the customer’s permanent teeth were forming, again between prenatal to 12 years of age. We recommend that the client seek the advise of their dentist to correct this problem. Cosmetic Teeth Whitening will not help excessively fluorosed teeth.